Instruction manual

Cardio Theater Instruction Manual

2. Channel Select — To select the desired listening channel.

3. Volume Adjust — To select desired listening volume.

4. Mute — Audio mute.

5. Headphone Jack — Standard 3.5mm headphone jack.

BACK TO TABLE OF CONTENTS

System Connections

Transmitters

Note: Make all connections to the TRANSMITTER and

Receivers with Power off.

Step 1

Connect the antenna to the antenna connector on the back of

the LCS-TX — 4 Channel (the LCS1 — Single Channel

Transmitter comes with the antenna already connected).

Step 2

Connect up to four (4) audio components to the stereo input

jacks on the back of the LCS-TX — 4 Channel and one (1) on

the LCS1 — Single Channel.

Step 3

Use the power cord supplied to connect the LCS-TX — 4

Channel or LCS1 — Single Channel to a 120-volt AC outlet.

http://www.cardiotheater.com/inst_manual.html (14 of 30) [4/13/2004 7:35:44 AM]