Instruction manual

Cardio Theater Instruction Manual
the LCS Receiver to the
handle or rail. Pull wire ties
firmly to secure and cut off
the excess.
This method may be used to mount a
LCS Receiver either horizontally or
vertically.
This is the preferred method of attaching
the LCS Receiver to minimize
interference with control panels and
displays.
For equipment with flat control panels
and no hand rails, Super Lock (a form
of super strong Velcro) may be used.
● Determine the best
mounting position.
● Clean the mounting surface
thoroughly.
● Remove the protective
cover from the adhesive
strip.
Position the LCS Receiver and press
firmly for the adhesive to grip.
CAUTION: When attaching to a
control panel, care should be taken to
avoid blocking access to controls or
illustrations.
BACK TO TABLE OF CONTENTS
http://www.cardiotheater.com/inst_manual.html (17 of 30) [4/13/2004 7:35:45 AM]