User Manual

Preparing the CardioNet System
CardioNet AECG System
8
Configure Monitor - Patient Profile
The Monitor-Patient profile consists of information specific to the
patient. Each profile is determined by the physician prior to
monitor placement as part of the monitoring prescription. A
Monitor-Patient profile will contain information regarding Monitor
screen preferences, automatic download time preferences and
automatic threshold levels. Physicians can customize a Monitor
Patient profile for a patient or can chose the default settings.
Please refer to the physician’s prescription prior to choosing your
patient’s Profile settings.
Download Monitor - Patient Profile to Monitor
Choose any Cardionet System for placement on a patient. Place
the Monitor into a Base connected to the computer that has been
designated as a the CardioNet Utility PC. Open the software
application on the computer’s desktop listed as “CardioNet”. Once
the Monitor is placed in the Base, the CardioNet software will
supply a list of your physician’s patients waiting to receive a
CardioNet Monitoring System. The Software will prompt the
clinician to select the patient who will be receiving the System.
After the patient selection has been made, the default Monitor -
Patient Profile will be displayed. Any changes to the Profile as
indicated by the physician on the prescription can be made at this
time (physicians refer Physician Instructions, pg III). Once all
choices have been indicated, the software will display a
confirmation notification indicating the Monitor is ready for
placement on the selected patient.