User's Manual
31 2
With your monitor on,
locate the black toggle
switch on the bottom of
you monitor. Move the
switch from green to red.
The blue “Good bye...”
screen will appear. Once
this screen disappears, the
monitor has completely
powerd down.
Unsnap the three leads
from the electrode pads.
Using soap and water,
gently lift the old electrode
pads off your skin. Never
pull them off quickly.
Throw the old electrode
pads away.
Open the battery door by
pushing the door snap
up.
Remove the battery by
grabbing both sides and
ling it out.
Turn monitor off Remove sensor battery Remove old electrodes
Sensor Care 43
How to Change Electrodes and Attach Sensor
4 . SE NSOR C A R E