User's Manual

7 8
If you choose to wear the
sensor on your belt, you
will need the belt clip.
Attach the clip to your
pants, skirt or belt. Insert
the end of the sensor
with the loop pointing
downward into the narrow
opening on the clip. Snap
the other end into the wide
opening with the wires
pointing upward.
If you choose to wear the
sensor on your chest, you
will need the neck strap.
Unsnap the strap and
thread it through the loop
on the sensor. Snap the
ends together and place it
over your head. The 2 tabs
allow you to adjust the
length of the neck strap.
If you choose neck strap If you choose belt clip
If your skin is red or ir-
ritated, you can use the
“Skin Prep” located in your
kit. This provides a protec-
tive barrier between your
skin and the electrode.
Wipe all 3 locations with
one skin prep. Allow to
dry and place electrodes
on top. If the skin irritation
continues, call CardioNet
at 1-866-426-4401.
Sensor Care 45
Skin
Irritated?
How to Change Electrodes and Attach Sensor
4 . SE NSOR C A R E