User manual

ENGLISH
cardo BK-1 | 21
PAIRING THREE cardo BK-1 UNITS
1. Cyclist 1 pairs with Cyclist 2 using Channel “A” as described in section 5.1a.
2. Cyclist 1 pairs with Cyclist 3 using Channel “B” as described in section 5.1a.
The Three-Way Conference Intercom Pairing is now complete and ready to use.
IMPORTANT: Three-Way Conference Mode Considerations
When in Intercom Conference mode with 2 other participants, you will not be able to receive mobile phone calls, GPS
navigation instructions or make a toggling call as long as the conference call is in progress.
5.2. USING THE INTERCOM
Channel B Button
• Connects to Channel B / D
Channel A Button
• Connects to Channel A / C
5.2a. MAKING INTERCOM CALLS
INTERCOM TOGGLING MODE: ONE ON ONE INTERCOM CONNECTION
Start/End Intercom call with Channel: Perform this action:
“A”
Tap
“B”
Tap
“C”
Double-tap
“D”
Double-tap
There are two ways to start an intercom call with devices that are paired to your cardo BK-1.
INTERCOM CONFERENCE MODE:
Option 1: VOICE CONNECT (VOX) Option 2: ALWAYS ON MODE
1. Start Intercom Conference Call with Channel
“A” and “B”
Speak any word loudly into the microphone
(Intercom Call ends automatically after 30 seconds
of silence)
1. Add/Remove Channel “A”: Tap
2. Add or Remove Channel “B”: Tap
(To end Intercom Call tap either or )