User manual
ENGLISH
cardo BK-1 | 23
6. BLUETOOTH DEVICES: MOBILE PHONE, GPS OR MP3
PLAYERS
Pairing the cardo BK-1 to a Bluetooth enabled device
To connect a Bluetooth device you must rst pair it to the cardo BK-1. Pairing is a one-time process. Once paired,
the Bluetooth device and the cardo BK-1 will automatically recognize each other when in range (10m / 33ft).
Your cardo BK-1 oers Multiple Device Connectivity (“MDC”) including:
➤ Intercom with up to four other cardo BK-1 units
➤ Mobile Phone / GPS
➤ A2DP Music Player
Mobile Phone &
A2DP Connectivity
GPS
MP3 Player
Up to 1,640 ft. / 500m*
Bike-to-Bike Intercom Range
Between 5 Separate Cyclists
NOTE: If using both a Bluetooth GPS and mobile phone, pair the mobile phone to the GPS device. See Section 6.1b
* Maximum range is measured under ideal conditions. Actual range is subject to terrain, topographic conditions and other interferences.
6.1. MOBILE PHONE AND GPS
6.1a. PAIRING A MOBILE PHONE
• Make and receive calls
• Listen to Stereo Music via A2DP (with compatible phones)
1. Turn on your mobile phone and make sure the Bluetooth function is activated.
2. Check the cardo BK-1 is in Standby (single BLUE ash every 3 seconds).
3. Press for at least 6 seconds. The BK-1 will rst ash RED. Continue to hold the button until the
RED and BLUE lights begin rapidly alternating.
4. Search for Bluetooth devices on your phone by following the phone’s instructions. Consult your
phone’s User Manual for more information.
5. After a few seconds the phone will list “cardo BK-1” as a discovered device. Select it.
6. If prompted for a PIN or Passkey, enter 0000 (four zeros).
7. The phone will conrm that pairing has succeeded and the cardo BK-1 will begin ashing slowly in BLUE.