User's Manual
5
English
Cardo Rider Q2™ |
STEP 3
SET UP FOR MOBILE PHONE CALLS: PAIRING
If you have a Bluetooth® enabled mobile phone and would like to make
and receive phone calls using the Cardo Rider Q2, you must rst pair your
headset to the mobile phone.
NOTE: If you have a compatible Bluetooth® GPS device you wish
to use with the Cardo Rider Q2, please skip this step, and continue
ahead to STEP 4: SET UP FOR BLUETOOTH GPS DEVICE.
Pairing is a one time process. Once the headset is paired to a specific
mobile phone during this Setup Procedure, they will remain paired
and automatically recognize each other whenever they are within
range. If the connection between the phone and headset is lost, tap
the CTRL button to reconnect the devices.
TO PAIR THE CARDO RIDER Q2 TO A BLUETOOTH
MOBILE PHONE
1. Turn on your phone and make sure its Bluetooth® function is
activated.
2. With the Cardo Rider Q2 headset turned ON, press and hold the
CTRL Button for at least six seconds until the Red and Blue Lights
begin rapidly alternating.
3. Search for Bluetooth® devices on your phone by following the
phone’s instructions. Please consult your phone’s User Manual for
more information.
4. After a few seconds the phone will list the Cardo Rider Q2 as a
discovered device. Select it and follow your phone’s instructions to
accept the pairing.
5. When prompted enter 0000 (four zeros) as your PIN or passkey.
6. Your phone will conrm that pairing has succeeded and the
headset will begin ashing slowly in Blue.
SETUP AND CONFIGURATION |
NOTE: If the Pairing process is not completed within two minutes the
headset will return to Standby mode.
With some mobile phones, you may need to tap the CTRL button
to connect the headset to the phone after pairing is complete. The
Cardo Rider Q2 headset will automatically connect to the last phone
connected to the headset.
STEP 4
SET UP FOR BLUETOOTH GPS DEVICE: PAIRING
If you have a Bluetooth® enabled GPS device and would like to
transmit navigation instructions and sounds from the GPS device
through the headset’s speakers, you must first pair your headset to
the GPS device.
NOTE: Not all Bluetooth® enabled GPS devices allow connections to
Bluetooth® headsets like the Cardo Rider Q2. Please consult your GPS
device’s User Manual for more information.
TO PAIR THE CARDO RIDER Q2 TO A BLUETOOTH® GPS
DEVICE:
1. Turn on your GPS device.
2. With the Cardo Rider Q2 headset turned ON, press and hold the
CTRL Button for at least six seconds until the Red and Blue Lights
begin rapidly alternating.
3. Search for Bluetooth® headsets on your GPS device by following
the device’s instructions. Please consult your GPS device’s User
Manual for more information.
4. If your GPS device prompts for a PIN or Passkey enter 0000 (four
zeros).
5. Your GPS device will conrm that pairing has succeeded. The
headset will begin ashing slowly in Blue.
6. If you wish to use a Bluetooth® mobile phone to make and
receive calls through the headset, you must now pair your