User's Manual
Table Of Contents
- 1. EINFÜHRUNG
- 2. AKKU AUFLADEN
- 3. ANPASSUNG UND EINSTELLUNGEN
- 4. ERSTE SCHRITTE
- 5. InterKom
- 6. KOPPELN UND NUTZEN VON GERÄTEN: HANDY, GPS NAVI UND MP3-PLAYER
- 7. UKW-Radio
- 8. FEHLERBEHEBUNG
- 9. KUNDENDIENST
- 10. MITTEILUNGEN
- 1. INTRODUCTION
- 2. CHARGEMENT DE LA BATTERIE
- 3. PERSONNALISATION ET REGLAGES
- 4. DEMARRAGE
- 5. Intercom
- 6. connexion AU telephone mobile, GPS OU LECTEUR MP3
- 7. Radio FM
- 8. DEPANNAGE
- 9. Support
- 10. NOTICES
CALLING INTERCOM CHANNELS “A” AND “B”
OPTION 1: Voice Connect VOX
Say any word loudly into the microphone. When you hear the Voice Command tone,
say “Call Intercom” to start an intercom call with “A” and/or “B” (subject to who is
present).
VOX Intercom calls with only “A” or “B” will end automatically after 30 seconds of
silence.
g OPTION 2: Via the Cardo SmartSet App (see 3.2)
☛
OPTION 3: Manual Mode
Use this to start an Intercom call with either:
• Channel “A”: Tap v
• Channel “B”: Double tap v
To end a call with either Channel “A” or “B” - tap v
To end a conference call with both “A” and “B” - Press v for 2 seconds.
If you are already in an Intercom call with “A” or “B”, you can add another rider
(“A” or “B”) by double-tapping v.
THREE-WAY INTERCOM
Use Channel “B”
Use Channel “A”
Rider 2
Rider 3
Rider 1
Pairing
Rider “1” is paired to Rider “2” and also to Rider “3”.
1. Rider 1 pairs to Rider 2 using Channel “A”
2. Rider 1 pairs to Rider 3 using Channel “B”
In this conguration, Rider 1 is using two Bluetooth connections:
IMPORTANT: Conference Mode Considerations
During a 3 or 4-Way Intercom Conference call, riders using both intercom channels “A” and “B” will
not be able to receive phone calls or GPS instructions as long as the call is in progress.
14
|