User's Manual

4.5 VOICE CONNECT VOX
The PACKTALK has VOX technology for safe and hands-free operation of some key
functions. See section 3 to adjust VOX settings.
VOX Activation Speak any word loudly into the microphone
Answer a call Speak any word loudly into the microphone
Reject a call Remain silent for about 15 seconds
VOX Sensitivity
(Default: Medium)
High: Use this setting if it is dicult to activate VOX
Low: Use this setting if it is too easy to activate VOX
VOX Operation
Mode
Set VOX to either activate the Voice Command (default) or to start an
Intercom Call.
Enable/Disable VOX
(For Intercom/Voice
Commands only)
In Standby, tap v and
Z
simultaneously
• Enable: Blue ash for 2 seconds
• Disable: Red ash for 2 seconds
5. INTERCOM
The scala rider PACKTALK is the world’s rst communication and entertainment system
to contain TWO intercom technologies that work to complement each other.
DMC
™
intercom mode enables large groups of riders to communicate via intercom
independently of each other, seamlessly and automatically adapting to rapid changes of
the group.
Bluetooth intercom mode is compatible with other scala rider intercom models, the
cardo SHO-1 and Schubert’s SRC-System™. Non-Cardo devices can connect via the Cardo
Gateway, allowing conversation between your PACKTALK and a non-Cardo brand of
Bluetooth intercom.
All intercom communication is full duplex with a range of up to 1 mile / 1.6 km (subject
to terrain and within line of sight). In DMC mode, intercom range can be extended to up
to 3 miles / 5 km in groups of 4 or more riders.
Intercom range with other models is limited to the distance of the device with the shorter
range.
For more info please visit www.cardosystems.com/PTcompatibility
Open the antenna for maximum range
To chat with someone via Intercom, rst pair your scala rider PACKTALK to the second unit.
Pairing is a one-time process. Once paired, the units should automatically recognize each
other whenever in range.
| 9
English