User's Manual

SMARTH Manual
4. Before You Ride
- 27 -
3. Under BLUETOOTH, tap PRIORITY for the default mobile phone.
To set the default phone through the Cardo Community
To set the default phone through the headset:
● During a mobile call, press ~Phone for 5 seconds.
4.6 Using Voice Commands
You can use voice commands for hands free operation of certain SMARTH features. Voice commands use voice
recognition. You loudly say a command and SMARTH performs the action. Voice commands are available in various
languages. English is the default language. You can change the language to another available language.
SMARTH uses pre-defined voice commands. The voice commands for each mode are as follows:
In Mode
To Perform The Action
Say
Standby mode
Hear voice the command list
"Command List"
Start A2DP
"Music On"
Turn on the FM radio
"Radio On"
Check battery status
"Battery Status"
Standby / FM / A2DP mode
Connect an One+8 Intercom call
<<Say Buddy Name>>
1
Connect an intercom conference call with A and B
"Call Intercom"
2
FM Radio
Turn off the FM radio
"Radio Off"
Jump forward to the next preset station
"Next Station"
Jump backward to the previous preset station
"Previous Station"
A2DP Music
Stop/pause A2DP
"Music Off"
Play the next music track
"Next Track"
Play the previous music track
"Previous Track"
DMC intercom
Mute the DMC intercom group
"Mute the Pack"
2
Unmute the DMC intercom group
"Unmute the Pack"
2
1
You must be in DMC intercom mode. For more information, see "Creating Groups for DMC Intercom" on the next
page
2
You must be in Bluetooth intercom mode.