User guide
CONTENTS OF RETAIL BOX
INTRODUCTION
Congratulations, and thank you for choosing the scala rider Q2
Bluetooth® Headset for bikers. This Manual will help you operate the
headset, but you should rst familiarize yourself with the Bluetooth
functionality of your cellular phone and/or GPS device before using
the scala rider Q2.
The retail box of the scala rider Q2 contains one headset unit. When
paired with another scala rider Q2, the headsets can be used as an
Intercom at a range of up to 1,640 ft (500m), subject to terrain and
external conditions.
The scala rider Q2 oers the following uses:
1. Bluetooth headset for mobile phone communication,
supporting headset* and Handsfree* proles (10m range)
2. Bike-to-Bike Intercom Communication with another Q2
unit (up to 1,640 ft. / 500 m range) in Full Duplex** mode
[purchased separately]
3. Turn-by-Turn GPS Navigation instructions and Streaming
Audio from compatible Bluetooth devices
4. FM Radio – built in FM radio receiver with six preset stations
5. MP3 Connectivity – Listen to your MP3 player while riding
The scala rider Q2 can establish an audio connection with one
Bluetooth device at a time. Please read the section “Using the
Headset” to see how you can switch the audio connection between
the paired devices.
____________________
* Mobile phones that do not support the Bluetooth Handsfree prole may
prevent you from using the Redial and Call Reject features
** Full duplex calls allow you to speak and hear the other party speak
simultaneously
MC – Multi-Connection
• Radio On/O/change stations
• Initiate/Terminate Buddy
Intercom call with Primary or
Secondary Buddy
CTRL – Control Button
• Power On, Power O
• Answer/End Call
Charging
Jack
Volume
Down
Volume
Up
NOTE: The scala
rider Q2 is also avail-
able in a cord-mounted microphone
version to better t certain full-faced
helmets with tight chin sections.
Headset
Helmet Clamp
Tab
Sliding Plate
Microphone
Right Speaker
(long cord)
Left Speaker
(short cord)
MP3 Jack
Back
Plate
3
scala rider
®
Q2
™
English