scala-600™ COVER
scala-600™ ALL THIS SHOULD APPEAR AT THE END OF THE GUIDE. U.S. and Worldwide Patent Pending; ©2006 Cardo Systems Inc. Assembled in China. Bluetooth® is a trademark owned by Bluetooth® SIG, Inc., scala-600™ is a trademark owned by Cardo Systems, Inc. All rights reserved by Cardo Systems, Inc. Cardo Systems, Inc.
scala-600™ TABLE OF CONTENTS 1. INTRODUCTION ..............................................................................................................................1 FEATURES.............................................................................................................................................1 DEFINITIONS .........................................................................................................................................1 2. SAFETY ..........................
scala-600™ • Follow all instructions and warnings labeled and marked in this manual. 1. Introduction Congratulations and thank you for purchasing the scala-600 , one of the world's most advanced and versatile Bluetooth® powered wireless headsets for mobile phones. • Use a cloth to clean the headset. DO NOT use liquid or aerosol cleaners. TM • Use caution when using your headset near water such as bathtubs, sinks, or swimming pools.
scala-600™ Use While Driving Check the rules and regulations regarding the use of wireless headsets in the area where you drive and obey the laws at all times. Pull over to the side of the road and park before making or answering a call if driving conditions require it. Do not initiate calls, perform pairing, re-connecting or similar operations while driving. Interference With Other Devices Most electronic equipment is shielded from RF signals.
scala-600™ 3.
scala-600™ 4. Before Using 5. Getting Started With the scala-600 Components Turn On/Off To turn ON the Headset, press and hold the wheel for at least 6 seconds until an ascending tone is heard, and a blue indicator light illuminates. Release the button. If you have not completed pairing and this is the first time that you have turned the Headset on, the Indicator Light will flash red and blue indicating that the Headset is entering pairing mode.
scala-600™ of the pin into the holding duct. Select a depth, so that when wearing the headset, the speaker fits snugly into the opening of your ear canal. as a discovered device. Select it, and when asked, follow your phone’s instructions to select the device. 6. 7. When prompted by your phone, enter 0000 (4 zeros) as your PIN or passkey. Your phone will confirm successful pairing.
scala-600™ 6
scala-600™ refer to the manual of your mobile phone. To improve voice tag recognition, use the headset to record voice tags on your phone. Redial To redial the last number: While no call is in progress, press the Wheel in quickly and release. While your phone is ON but no call is in progress, press briefly the CTRL button, followed by a sound. Now pronounce the name of the party you wish to call and wait for feedback from the phone. The type of feedback depends on your phone.
scala-600™ 7.
scala-600™ no other Bluetooth phone can hear your audio signals. 8. FAQs What is the Cardo scala-600 headset? How can I improve stability of the headset when using the ear-loop? TM The scala-600 wireless headset is a comfortable, stylish and easy to use high-end accessory to a Bluetooth® mobile phone or smart-PDA that enables you to hear and speak without holding your mobile phone near to your ear. The bow of the ear loop is highly flexible and can be bent to tighten its grip around your ear.
scala-600™ 9. Summary of Functions Explanations: Long press = Pressing the button for at least 3 seconds Tap = Briefly press the button If you want to… …doDo this Turn on the headset Turn off the headset Answer a call Reject a call Terminate a call Increase the volume Press the Wheel steadily for at least 3 seconds Press the Wheel steadily for at least 3 seconds Short press the Control Button Long press the Control Button Short press the Control Button Move the Wheel up by steps.
scala-600™ 10. Troubleshooting Problem Action Pairing fails 1. Delete scala-600 from the list of your paired devices onlist in your phone (if it is listed). 2. Turn off the mobile phone and headset. 3. Take the battery out of the phone and put it back in. 4. Repeat the pairing process. Can’t answer phone calls or perform voice dialing (Assuming your mobile phone supports Voice Dialing) 1. Make sure your headset is turned ON and in standby mode while the blue light indicator flashes slowly. 2.
scala-600™ • Consult the dealer or an experienced radio/ TV technician for help. 11. Technical Specifications Technology Maximum power Maximum link distance Typical talk time Typical standby time Typical charging time Power Source Weight Approvals 13. European CE Notice Compliant with Bluetooth®, Ver. 2.0 2.
scala-600™ What this warranty does not cover 1. Defects or damage resulting from the use of this product in other than its normal and customary manner. 2. Defects or damage from misuse, accident or neglect. 3. Defects caused by improper operation, maintenance, installation, adjustment or modification of any kind. 4. Products opened, disassembled or repaired by nonauthorized parties. 5.
