User Manual

6
NOTE: Some phones do not transfer the call
automatically to the headset when initiating
the call by the phone’s keypad. In this case
press briefly CTRL or use the phone’s keypad
to transfer the call to the headset.
Voice Dialing
To use voice activation (if available), you must
first assign voice tags to the desired parties
listed as your contacts in your mobile phone. If
you are not familiar with this procedure, please
refer to the manual of your mobile phone. To
improve voice tag recognition, use the headset
to record voice tags on your phone.
While your phone is ON but no call is in
progress, press briefly the CTRL button,
followed by a sound. Now pronounce the name
of the party you wish to call and wait for
feedback from the phone. The type of feedback
depends on your phone.
NOTE: After activating the Voice-Dialing
command, you may always cancel the
command by simply tapping CTRL once.
Answering Calls
When you hear the ring tone on the headset,
briefly tap the CTRL button.
NOTE: Even though your phone may already
ring or vibrate, do not tap the headset's CTRL
before you actually hear the ringing of the
incoming call on the headset. However, some
phones never transmit the ringing sound to the
headset. In such case you must always tap the
CTRL button briefly when your mobile phone
rings or vibrates.
Terminating Calls
To terminate a call, press briefly the CTRL
button, followed by a sound to confirm the
termination. Wait at least three seconds before
pressing the CTRL button again to place a new
call. Alternatively, you may terminate a call by
using the END key of your mobile phone. If
the other party terminates the call, no further
action on your part is required.
Volume Control
In addition to using the volume controls of
your mobile phone, you can use the Wheel to
adjust the headset's speaker volume.
Increase the
volume
Move the Wheel up by
steps. When you hear a
beep it is at maximum.
Decrease the
volume
Move the Wheel down by
steps. When you hear a
beep it is at minimum.
Mute Function
To activate MUTING: During an ongoing call,
briefly press the center square of the Wheel.
To de-activate the Mute function, tap the
Wheel again.
Redial
To redial the last number: While no call is in
progress, press the Wheel in quickly and
release.
Call Reject
While no call is in progress and you hear the
ring tone, press and hold CTRL for three
seconds to reject the call and stop the ringing
Call Waiting / Conference
Call
NOTE: This feature works only with mobile
phones that fully support the Bluetooth "hands-
free profile".
• While one call is in progress and there is a
second incoming call (call waiting), tap the
Wheel to put the current call on hold and
accept the second call.
• While one call is in progress and second call
on hold, tap the Wheel to swap the calls.
• While one call is in progress and second call
on hold, press and hold the Wheel for three
seconds to add the held call to a conference
call.
• To TERMINATE one of the calls in
progress, tap briefly the CTRL button.
Doing so will let you continue the second
call in progress.