User's Manual

Cardo S-800

™

Getting Started

To use your Cardo S-800 (“the headset”), please follow these

initial steps:

• Charge your headset

• Pair your headset with a Bluetooth

-enabled mobile phone.

1. Charging your Headset

The headset comes with a built-in rechargeable battery. Prior to

using the headset, make sure to charge the headset for at least 4

hours. Normally it takes approximately 2 hours to fully charge the

headset.

1. Connect the charger to an AC wall outlet and the charger plug to

the headset’s Charging Jack. The headset’s LED status indica--

tor will be red during charging.

2. When the battery is fully charged, the red LED will turn off.

3. Disconnect the charger from AC wall outlet and the headset.

NOTE: Charging indication may be delayed for a few seconds if the

headset has not been used for a long time or the battery is drained.