User guide

ManualsBrandsCardo Systems ManualsHeadphonesSCALA RIDER G4 POWERSET

English

NOTE: If the Pairing process is not completed within two minutes the G4

will return to Standby mode.

A2DP Audio Source Selection:

If an A2DP Music Player is paired, the headset will use it as the default

audio source. To change the audio source from the current device

to the other device, stop the music playing from the current device

and start A2DP music playback from the other device. Turning o the

headset will set the default back to the A2DP Music Player.

Operating your A2DP source from your G4

Play Press and hold the MP3 Button for 3 seconds

Pause/Stop* Press and hold the MP3 Button for 3 seconds

Forward Press and hold the Volume Up Button for 3 seconds

Rewind** Press and hold the Volume Down Button for 3 seconds

* Varies depending on your mobile phone model

** With some phones you may need to repeat this action once more

7. BUILT-IN FM RADIO AND EXTERNAL MP3

PLAYER (CABLE OPTION)

7.1 FM RADIO

The scala rider G4 is equipped with an FM stereo radio

receiver and RDS (Radio Data System) technology, allowing

you to choose how and when you listen to your favorite stations.

Turn on Radio While in Standby mode, press and hold CHANNEL

“B” button for 3 seconds

Turn o Radio While listening to the Radio, press and hold

CHANNEL “B” button for 3 seconds

Switch to next

preset station

While listening to the Radio, tap the CHANNEL “B”

button to cycle through the 6 Preset FM Stations

Start Intercom call While listening to the Radio, start talking loudly

Initiate Voice Dial

from your Mobile

Phone

While listening to the Radio, tap the Mobile Button

and pronounce loudly the name of the person you

wish to call. This feature is supported only by mobile

phones that include the Voice Dial feature

Initiate Redial from

your Mobile Phone

While listening to the Radio, tap the Mobile

Button twice

RDS ON/OFF

(Default: OFF)

While the Radio is on, press and hold Volume Up

and Volume Down Buttons simultaneously for 3

seconds (Also controlled via the PC software and

Settings Customization Voice Menu)

Thanks to the RDS feature, the G4 will automatically select the

strongest signal available for the FM station you wish to listen to, no

matter where you are riding.

RDS ON/OFF (press simultaneously 3 seconds while radio is on)

• ON/OFF FM Radio

(press 3 sec.)

• Switch among pre-saved

stations (tap brie y)

scala rider

PowerSet