User guide

5.3 LISTENING TO MUSIC VIA A2DP

The scala rider can also receive audio via a cable

from non-Bluetooth MP3 Players or audio sources as

described in section 5.4

Available only on AVRCP compatible Bluetooth audio sources

Play In Standby, tap

Pause/Stop Press for 2 seconds

Next Track With music ON, tap

Previous Track* With music ON, double tap

*With some phones you may need to repeat this action

SWITCHING BETWEEN A2DP AUDIO SOURCES

1. Stop the music playback from the current device.

2. Start music playback from the other device.

5.4 CABLECONNECTED MP3 PLAYERS

The USB Port can be used to connect a non-Bluetooth audio source

using the connector cable (available for purchase separately).

Micro USB / AUX •

1. Check that the scala rider is in Standby.

2. Connect the MP3 cable to the Music Player’s jack and insert the

other end into the USB Port.

To listen to music from a cable-connected device, operate the Music

Player using its buttons as usual (FF/REW/PLAY/PAUSE).

scala rider

Qz |