User guide
The scala rider 
TeamSet
pro
The scala rider 
TeamSet
pro
 oers VOX technology for safe and 
hands-free operation of some key functions.
For incoming calls, just pronounce loudly any word (e.g. “hello”). To 
reject an incoming call, you need only to remain silent for about 15 
seconds. To reject an intercom call remain silent for 30 seconds.
While on standby press and hold the Volume Up and Volume Down 
Buttons simultaneously for three seconds until you hear a beep. The 
default status is Voice Connect enabled.
The Enable/Disable Voice Connect feature aects only the 
Intercom functionality. 
MAKING AND RECEIVING MOBILE 
PHONE CALLS
 Tap the CTRL Button or speak loudly any word 
of your choice during an incoming call.
 Tap the Intercom Button or remain silent for 
15 seconds during an incoming call.
 Tap the CTRL Button to end a call.
 During Standby, tap the CTRL Button and 
state the name of the person you wish to 
call. This feature is supported only by mobile 
phones that support the Voice Dial feature.
 Press and hold the Volume Down Button for 
three seconds during Standby.
 If your Bluetooth mobile phone is paired to a Bluetooth GPS 
device, not directly to the scala rider 
TeamSet
pro
, some of the 
above Phone functions may not be available.
When the headset is on an active phone call, any Buddy Intercom call 
request will be rejected automatically.
Once the phone call audio link drops, you can initiate and accept 
Buddy Intercom calls.
STATUS LIGHT STATES
None  
Alternating red/blue ashes  
Rapid red ashes  
1 blue ash every 3 seconds  
2 blue ashes every 3 seconds  
1 red ash every 3 seconds  
2 red ashes every 3 seconds  
Solid red  
English
9
scala rider
®
TeamSet
™ 
PRO










