User guide

English
The default mode of this feature is ON (enabled).
Each time you switch o and turn on the headset, the VR feature will
be automatically enabled.
To disable / enable the VR feature see phone functions below.
Note: The VR feature works well while driving up to 70km/h
or 44m/h with 3/4 helmet and up to 120km/h or 75m/h
with a closed full-faced helmet.
PHONE FUNCTIONS
Answer a call Tap the CTRL Button or speak loudly any word of
your choice.
Reject a call Tap the Intercom Button or remain silent for 15
seconds during an incoming call.
Terminate a call Press and hold the Intercom Button for 3
seconds when a call is in progress. For some
mobile phones you may need to press the
Control button to end the call.
Voice Dial During Standby, tap the CTRL Button and state the
name of the person you wish to call. This feature
is supported only by mobile phones that support
the Voice Dial feature.
Redial During Standby, tap the Intercom Button
Enable/Disable
voice command
feature
Long press the volume up and down buttons simul-
taneously until you hear a beep. The default status is
voice command enabled.
NOTE: If your Bluetooth mobile phone is paired to a Bluetooth GPS
device, not directly to the scala rider TeamSet, some of the above
Phone functions may not be compatible.
INTERCOM FUNCTIONS–Driver’s Unit
G E N E R A L F U N C T I O N S
DESIRED RESULT: REQUIRED ACTION:
Start using the intercom During standby, start talking loudly to
activate the feature
Terminate operation of
Intercom
Stop talking. The audio connection will be
terminated within 25 seconds.
Conference Call (add
passenger to an active call)
During an active phone-call, tap the
intercom button.
End Conference Call
(release passenger from a
conference call)
During a conference call, tap the intercom
button.
Note: In case the person on the other side of the intercom is not responding and
you start talking, 2 beeps will alert you that the other side is not available
STATUS LIGHTS
STATUS LIGHT STATUS
None Headset is o
Alternating Red/blue ashes Mobile phone/GPS Pairing mode
1 blue ash every 3 seconds Standby – No call is in progress
2 blue ashes every 3 seconds Call is in progress
1 red ash every 3 seconds Battery is low
2 red ashes every 3 seconds Low battery while a call is in progress
Solid red Charging
9
scala rider
®
TeamSet
™