User's Manual
PHONE
Volume -
Quick start guide
Dainese S.p.A.
via Louvigny, 35
36064 Colceresa (VI),
Italy
ph.: +39 0424 410711
fax: +39 0424 410700
www.agv.com
INSYDE_QSG_ENG_20200520
A SSEMBLY |
Make sure to perform a correct and safe assembly. Incorrect assembly can lead to dangerous situations while riding. In case of any doubts, ask your dealer to support.
1
1
Remove the two covers applied on the helmet:
Remove the two covers applied on the helmet:
using the specific tool
using the specific tool
1
provided, release
provided, release
the two clips of the back unit
the two clips of the back unit
2
and detach it;
and detach it;
release the clip of the headset
release the clip of the headset
3
and push it
and push it
downwards. Remove the right-side cheek pad
downwards. Remove the right-side cheek pad
4
(see the helmet user manual).
(see the helmet user manual).
GETTING STARTED
On/Off
Volume +
Mute
Use while charging
Flash
Bluetooth
®
AGV INSYDE
Bluetooth
®
AGV INSYDE
keyboard
keyboard
main unit
main unit
intercom mobilemedia
volume up volume down
LED
Default language is English. Language set can be changed
via the Cardo Connect app.
USB charging
USB charging
and firmware upgrade
and firmware upgrade
3
3
Apply the headset through the three hooking
Apply the headset through the three hooking
guides
guides
1
and hook the plastic clip placed on
and hook the plastic clip placed on
the lower side
the lower side
2
. Then be sure to thread its
. Then be sure to thread its
cable underneath the helmet base trim
cable underneath the helmet base trim
3
.
.
4
4
Connect the microphone and the speakers ca-
Connect the microphone and the speakers ca-
bles. Then, on the right side of the helmet, in-
bles. Then, on the right side of the helmet, in-
stall the microphone in two movements.
stall the microphone in two movements.
2
2
Install the back unit and thread its right side ca-
Install the back unit and thread its right side ca-
bles
bles
1
under the helmet base trim (use the tool if
under the helmet base trim (use the tool if
necessary). Move the retention system
necessary). Move the retention system
2
out be-
out be-
fore threading the cables. Attach the cover with the
fore threading the cables. Attach the cover with the
hole for the charging slot
hole for the charging slot
3
supplied with Insyde.
supplied with Insyde.
5
5
Drive the microphone cable through its own
Drive the microphone cable through its own
slot on the speaker’s housing.
slot on the speaker’s housing.
6
6
Install both the speakers
Install both the speakers
1
in their housing
in their housing
using the adhesive strap supplied. To install the
using the adhesive strap supplied. To install the
left speaker, lift the cheek pad first, then attach
left speaker, lift the cheek pad first, then attach
it making sure that all its press studs
it making sure that all its press studs
2
are
are
fixed (see the helmet user manual for the cheek
fixed (see the helmet user manual for the cheek
pad operations).
pad operations).
7
7
Insert the cables connectors
Insert the cables connectors
1
in the empty
in the empty
space between the outer shell and the polystyrene,
space between the outer shell and the polystyrene,
on the right side. Insert the microphone cable first,
on the right side. Insert the microphone cable first,
then the speakers one.
then the speakers one.
8
8
Detach the crown pad releasing its two snap
Detach the crown pad releasing its two snap
buttons
buttons
1
, then thread the left speaker cable
, then thread the left speaker cable
2
between the polystyrene and the crown pad. Then
between the polystyrene and the crown pad. Then
fix the crown pad, taking care not to damage the
fix the crown pad, taking care not to damage the
cables.
cables.
1”
x1 x1
x1
1”
Initiate pairing
1
5”
2
Pair phone
Search for Bluetooth
®
devices
3
Add a second phone/GPS
x2
4
Pair phone
Search for
Bluetooth
®
devices
flash
4
Pair GPS
x1
4A
Search for
Bluetooth
®
devices
GPS
Paired successfullyEND
Flash
Voice dial
x1
Redial
x2
Speed dial
Set via app
x3
Answer a call
Any of these three buttons
x1
Ignore a call
x1
Reject a call
2”
End a call
x1
PAIR MOBILE DEVICES
5”
Flash
Cancel pairing
x1
Start / Stop sharing call
Share a call with DMC group
Bridging active phone calls to the DMC group
OVERVIEW
1 1 1
2
1
3
2
3 2 2
3
22 1
1
4
1
1
2
cardosystems.com
support@cardosystems.com
USA & Canada: 1-800-488-0363
International: +49 89 450 36819
Register your device on cardosystems.com/update/ for
• Receive software update
• Customize the device
• ...and more!
Full version of the User manual available on
cardosystems.com/support
agv.com
USER MANUAL
• For easy configuration
• Remote control operation
• On-the-go setting customization
• Managing DMC groups
• Available on:
CARDO MOBILE APP
1
MAN00514 MANUAL INSTALLATION GUIDE AGV - ENGLISH_A01