Q3/Q3 MultiSet™ User Guide
CONTENTS 1. INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 6.3 LISTENING TO MUSIC VIA A2DP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2. CHARGING THE SCALA RIDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6.4 CABLE-CONNECTED MP3 PLAYERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3. CARDO COMMUNITY® PLATFORM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6.
1. INTRODUCTION Thank you for choosing the scala rider Q3® Bluetooth® communication and entertainment system for motorcycle helmets. This manual will help you set up, configure and operate the scala rider Q3. CARDO COMMUNITY® • Customize your scala rider settings • Download software upgrades, enhancements and new features ADVANCED TECHNOLOGY If you have purchased the Q3 MultiSet™, your retail box contains two factory-paired scala rider Q3 units.
CONTENTS OF RETAIL BOX NOTE: If you purchased the scala rider Q3 MultiSet, the Box will include two sets of each item listed below.
2. CHARGING THE SCALA RIDER Make sure that your scala rider is fully charged for at least 4 hours before initial use. 3. CARDO COMMUNITY PLATFORM Visit http://community.cardosystems.com for the following features: • Register your device for warranty and technical support • Download and install the latest software upgrades* • Customize settings* Charging with the wall charger is faster than via a computer USB port.
4. GETTING STARTED 4.
4.4 SETTINGS Customize various settings according to your preferences: • Spoken Status Announcements, i.e. informing you about connectivity status (default: ON) • AGC sensitivity level for the speakers (default: Medium) • VOX sensitivity level for the microphone (default: Medium) • Click-to-Link Intercom (default: ON) •A 2DP audio / Intercom priority to change priority for A2DP audio sources (via Cardo Community only) To change settings: •V ia the Cardo Community platform at http://community.
5.2 PAIRING INTERCOM CHANNELS 5.3 MAKING INTERCOM CALLS Call Channel A Tap “IC” once NOTE: Pairing a Channel will replace any existing paired device on that Channel with the new device. Call Channel B Tap “IC” twice If you have purchased the Q3 MultiSet, the retail package contains two pre-paired units configured to communicate via their “IC” buttons on Channel A.
5.5 CLICK-TO-LINK® INTERCOM Click-to-Link is the spontaneous, “social” feature of your scala rider. Use Click-to-Link to make intercom calls with other scala rider users near you without pre-pairing. Click-to-Link can be disabled on your Q3 effectively blocking any attempt by others to make Click-to-Link calls to you. If you want to… 6.
6.2 MAKING AND RECEIVING PHONE CALLS IMPORTANT! • If you have paired 2 different mobile phones directly to your scala rider , you will need to set one as default for making calls. See section 6.2b for details. • If your GPS supports it, you can pair the second mobile phone directly to the GPS and then pair the GPS to your scala rider, and so connect both mobile phones and the GPS to your scala rider.
6.3 LISTENING TO MUSIC VIA A2DP NOTE: The scala rider can also receive audio via the enclosed cable from non-Bluetooth MP3 Players or audio sources as described in section 6.4 Available only on AVRCP compatible Bluetooth audio sources Play In Standby, tap “MM” Pause/Stop Press “MM” for 2 seconds Next Track With music ON, tap “MM” Previous Track* With music ON, double tap “MM” *With some phones you may need to repeat this action SWITCHING BETWEEN A2DP AUDIO SOURCES 1.
7. FM RADIO Your scala rider includes a built-in FM radio with a 6 Preset memory and RDS (Radio Data System). 7.1 GENERAL FUNCTIONS Turn on Radio In standby, double tap “MM” Turn off Radio Press “MM” for 2 seconds Next Station Preset With radio ON, tap “MM” Previous Station Preset With radio ON, double tap “MM” Preset stations can be saved via the Cardo Community platform or directly on your scala rider. 1. Turn on the Radio. 2.
7.4 RDS (RADIO DATA SYSTEM) RDS allows your scala rider to automatically retune to the strongest frequency available for the FM station you are listening to when the signal becomes too weak. RDS ON/OFF (Default: Off) With Radio ON, press “V+” and “V-” simultaneously for 2 seconds 10. NOTICES Federal Communications Commission (FCC) Statement 15.
IC RF Radiation Exposure Statement: This equipment complies with the RSS-102 exemption from routine RF exposure evaluation for use in an uncontrolled environment. European CE Notice Your Cardo product (the “Product”) is in conformity with the following essential requirements of Council Directive 1999/5/EC (referred to as R&TTE Directive): Articles 3.1a, 3.1.b and 3.2. The Product is manufactured in accordance with Annex II of the above directive.
This Product is intended to be used only as a communication and entertainment device and should not be used in any location or jurisdiction where its use is prohibited. The warranties and remedies contained herein are exclusive and in lieu of all other warranties express, implied or statutory, including any liability arising under any warranty of merchantibility or fitness for a particular purpose, statutory or otherwise that Cardo specifically disclaims.
or asset that belong to you or to third parties, any of which may result from using the Product under any circumstances or conditions and irrespective of jurisdiction. altering substance, and will not carry, use or consume these substances before or during the use of the Product. 1.
