User Manual
4.1.1.3 DELETING DMC INTERCOM GROUPS
If you delete a DMC intercom group, you must rejoin it if you want to connect to it again in the future.
To delete a DMC group:
1. Confirm your PACKTALK BOLD is in DMC intercom mode (LED flashes green slowly).
If your PACKTALKBOLD is not in DMC intercom mode, press and .
2. Press for 5 seconds. The LED flashes green quickly.
3. Press and for 2 seconds.
4.1.2 USING DMC INTERCOM
4.1.2.1 ADDING A NON-DMC PASSENGER
You can use the DMC bridging feature to add a non-DMC rider or passenger to the intercom group.
To bridge a non-DMC passenger/rider:
1. Verify that the passenger/rider is paired via Bluetooth to Channel A (see Setting Up non-DMC Intercom
Groups on page 16).
2. On your unit, press .
To disconnect the bridge:
● Press .
4.1.2.2 CHATTING PRIVATELY
You can chat privately with a specific member of your DMC group.
This option is also available using the Cardo mobile app.
To chat privately:
1. In the Mobile app, select the rider you want to speak with in private or pair with the rider's device on Bluetooth
channel B. (For details, see Pairing Your Unit to Bluetooth Devices on page 6.)
14