BCG Assembly Instructions MINI BIKE F1BC4018 Please keep this instruction manual for future reference Adult Assembly required: Keep all parts out of the reach of children Customer Service: (888) 922-2336, 8:00am to 5:00pm, Central Standard Time Monday thru Friday (Made in China)
Table of Contents • Table of Contents ……………….page 1 • Warnings …………………………page 2 • Overview Diagram ………………page 3 • Parts List …………………………page 4 • Assembly Instructions …………..page 5 • Monitor Operation Instructions …page 6 • Care and Maintenance ………….
Warnings •Read this manual before assembling or using this product. Check product for loose or broken parts before each use. •Discontinue use when any missing, broken, and loose parts are found. •The maximum weight limit of this mini bike is 220LB. •Position the Mini Bike on a clear leveled ground. •Keep children and pets away from the machine at all times. •Do not store your Mini Bike outside or where exposed to moisture or extreme temperatures. •Only one person at a time should use this Bike.
Overview Diagram 7 13 6 1 5 12 2 3 4 8 9 10 3 11 14
Parts List NO DESCRIPTION Qty 1 Housing 1 2 Pedal (right) 1 3 Foot (rear) 1 4 Foot(front) 1 5 Rotary knob 1 6 Monitor operation 1 7 Pedal(left) 1 8 Hexagon socket head bolts 4 9 Plain washer 4 10 Open-ended spanner 1 11 Allen key 1 12 Crank arm(right) 1 13 Crank arm(left) 1 14 Plug-in connector cable 1 15 LCD display screen 1 16 Mode button 1 4
Assembly Instructions A Figure A: Attach the front and rear feet (3), (4) to the housing (1) with the hexagon socket head bolts (8) and plain washers (9). To do this use the supplied Allen key(11). Note: Ensure that the front and rear feet (3), (4) are correctly positioned. Figure B: B 7 Attach the right and left pedals(2), (7) (identified by R= right and L=left) to the corresponding crank arms (12), (13). Use the supplied open-ended spanner (10) .
Monitor Operation Instructions MILE 15 16 ● Computer function You can also use the Mini Bike trainer with the monitor operation (6) switched off. However, the LCD display (15) of the monitor operation (6) (see Fig D) can give you helpful information about the results of completed training sessions and tells you how your training may be improved. The arm and leg trainer is a device in accuracy class C.
Care And Maintenance • • Avoid dropping the mini bike and components. Do not use or store in wet or humid conditions. Wipe clean with a soft dry cloth. Use light sewing machine oil to lubricate the piston when they start to have noise or screech. Ensure batteries are inserted into the mini-Bike correctly, with + and – terminals are aligned correctly. Keep battery compartment clean each time batteries are replaced. Alkaline batteries can be safely disposed of with household waste.
