User`s manual
Intel-GE Care Innovations™ QuietCare® System
Hardware Maintenance Guide
Document: DHF-3756 Page 51 of 60
Revision: 1.0 Effective: January 29, 2012
4. Remove the backing from the VHB tap already supplied in the bracket and secure the sensor.
a) Make sure the sensor is securely in the bracket, with the bracket arms sitting in the groove in the
sensor body.
Screw in bracket: Remove backing from VHB tape:
Clip in sensor and orient correctly:
Example: sensor at 45° toward door:
Mounting PIR sensor on Drywall
MountingonHard/SmoothSurfaces(Non‐Drywall)
On other hard/smooth surfaces (e.g. bathroom tile, ABS and Polycarbonate, Phenolic, plastics, mirrors,
plastered fire proof cement, etc.) use double-sided tape to mount the sensor, pressing firmly for 16 seconds.
Note that if a component is moved you should use a new piece of tape if possible.