Product Manual
P|5
M
O
D
E
M
E
M
Do not expose to severe environments. Storage
mixtures.
Do not use on patients with scarred tissue or tissue
compromised by skin disorders or trauma in the vicinity
of the forehead measurement area; patients treated
with certain drug therapies that may affect normal body
temperature or use on patients while skin is exposed to
external sources of heat or cold such as direct sunlight,
Initial Setup
1. To remove Battery Cover, press down at the arrow mark and
also on the center of the cover, SLIDE it in the direction of the
arrow as shown in Figure 1.
2. Install (2) AA alkaline batteries with polarity as shown in the
batterycompartment.AllLCDdisplaysegmentswillbriey
illuminate during self-test, and you will hear a “beep”.
3. Close the battery cover by pressing down both the arrow mark
and the bottom of the cover, SLIDING the cover in the opposite
direction of the arrow as shown in Figure 2.
Do NOT press the battery cover to force it closed if the battery
cover doesn’t close tight as shown in Figure 3. If this happens,
remove the battery cover by SLIDING as described in step 1.
Repeat step 3 to close the battery cover tight.
Caution: Closing the battery cover by force may damage the
battery cover latch and result in battery damage. Always follow
the instructions and close the battery cover by SLIDING only.
If thermometer will be stored for a long period, remove
batteries.
Figure 1