Product Manual

P|9
Room temperature mode measures the temperature of the
room in which the thermometer is located. Allow 20 minutes
for the thermometer to adjust to abrupt changes in room
temperature.
Setting SURFACE or ROOM Modes
1. If Caregiver® is powered off (blank display), press POWER.
2. Press and hold MODE for 5 seconds. The currently set Mode
(Body, Surface or Room) will ash.
3. Press MODE repeatedly to cycle to the next mode -
SURFACE/ROOM/BODY.
4. Press POWER key to exit this function and display the
temperature in the desired Mode.
5. Caregiver will remain in the chosen Mode with each press
of the POWER button until it powers off after 30 seconds.
It will then revert back to BODY Mode.
Setting Date and Time
This setting is only necessary at initial setup and when the
batteries are changed.
1. If Caregiver is powered off (blank display), press POWER.
2. Press and hold SET for 5 seconds. The currently set date will
display and the “months” digits will ash.
3. Press MODE repeatedly to increase the month by 1 or
press·
o

o
F repeatedly to decrease the month by 1.
4. Press SET to change the DAY. The “day” digits will ash.
5. Press MODE repeatedly to increase the day by 1 or press
o

o
F repeatedly to decrease the day by 1.
6. Press SET to change the YEAR. The “year” digits will ash.
7. Press MODE repeatedly to increase the year by 1 or press
o

o
F repeatedly to decrease the year by 1.