Specifications

Installation & Maintenance Manual
20
Drain Selection
Press  to change parameter:
Cd = drain with electrodes under power
td = drain without power (timed)
Differential Setting
(on CDH, CDD, CDT controllers only)
1. diF
2. Differential value
Set Point Setting
(on CDH, CDD, CDT controllers only)
1. SEt
2. Set point value
High Limit Alarm Set Point
(on CDH, CDD, CDT controllers only)
1. HI
2. High limit alarm set point value
Low Limit Alarm Set Point
(on CDH, CDD, CDT controllers only))
1. LO
2. Low limit alarm set point value
Switch Off Delay Time
1. tdo
2. Delay in seconds for unit OFF after reaching set point.
(MUST ALWAYS BE SET = 0).
Fill Water Conductivity
1. Water conductivity reading (micromhos)
2. Set point (humidity)
3. Differential (humidity)