Specifications

CAREL gaSteam
41
Fig. B
• Unscrew and remove the steam generator lid knobs G;
• Remove the steam generator lid;
• For simple cleaning, a poly brush dipped in Lime-Away, CLR or a 5% phosphoric acid solution, may be
used to clean off the mineral debris on the heat exchanger and side walls of the boiler. Filling the boiler
with water containing the cleaning solutions listed above could also be done.
• For more total cleaning, remove the heat exchanger H and wash it down with a mild solution of Lime-
Away
®, CLR or 5% phosphoric acid solution to remove any scaling or buildup that has occurred - do
not use tools that will scratch the coating;
• Disconnect the cables to the drain and fill pumps and assembly O;
• Remove the nuts from assembly O and extract it being careful not to damage gasket L;
• Unscrew and remove screw M to free the filter N and wash it also in a mineral removing solution;
• Using a wood or paint scraper and the solution, clean the interior walls of the steam generator