Specifications

Installation & Maintenance Manual__________

1. Receiving and Unpacking Equipment

IMPORTANT: BEFORE beginning installation:

• Check for shipping damage to cartons. Mark the shipping waybill accordingly

• Open cartons and check for any hidden damage. Mark the shipping waybill accordingly.

• Check packing slip to ensure all items have been received. Notify Carel LLC of any shortages or

damaged parts. You must notify Carel USA within 5 working days of any shortages.

Review Unit Description, Section 19, before beginning installation.

To open the front panels of the humidifier, you must:

1. Open the latch on door A and swing it open;

2. Remove the screws V with a screwdriver;

3. Open the panel B by swinging out the top portion about 1 inch, supporting

the sides with both hands;

4. Remove the panel B by pulling it up and out of the frame.

To close the front panels, you must:

1. Support panel B at the sides, slide the bottom into the frame at an angle;

2. Push the top forward into place;

3. Using a screwdriver install the two V screws in the top;

4. Close door A and latch it.

Your gaSteam humidifier will consist of:

• 1 gas-fired steam humidifier

• 1 ¾” X ½” Female manually operated water valve

• 1 Manually operated gas valve (UG045: ½”, UG090: 1”)

• 1 Vent pipe with test plug (test plug may need to be field installed per local/national code).

• 2 80mm X 3" exhaust vent adapter

• 1 Y-fitting for steam distribution (UG090 unit contains 2 Y-fittings)

• 1 Alternate 0.7 gal/min fill valve (packaged loose): See Section “Water Supply” for details.

• 4 adjustable mounting feet

To open the electrical and burner compartment, open the right section as below. The hydraulic section

is on the left:

Part. V