User manual

Installation, Operating & Maintenance Manual

IMPORTANT

BEFORE INSTALLING OR HANDLING THE HUMIDIFIER PLEASE CAREFULLY READ AND FOLLOW THE

INSTRUCTIONS AND SAFETY STANDARDS DESCRIBED IN THIS MANUAL AND ILLUSTRATED ON THE

LABELS ATTACHED TO THE MACHINE.

This humidifier produces non-pressurized steam by means of electrodes immersed in the water contained in

the cylinder-boiler (hereafter called the cylinder). The electrodes pass current through the water, which also

provides resistance, heating the water into steam, which is used to humidify environments or industrial

processe s, using special distributors.

The quality of the water used affects the process of evaporation, so the humidifier may be supplied with

untreated water, as long as this is drinkable and not softened or demineralized; the evaporated water is

automatically replaced using a fill valve. This humidifier has been designed exclusively to directly humidify

rooms or ducts, using a distribution system. The installation, use and maintenance operations must be carried

out according to the instructions contained in this manual and on the labels applied internally and externally.

The conditions of the env ironment and the power supply v oltage must comply w ith the specified

values.

All other uses and modifications made to the humidifier that are not authorized by the manufacturer are

considered incorrect.

Liability for inj ury or damage caused by the incorrect use of the humidifier lies exclusively with the

user.

Please note that the humidifier contains pow ered electrical devices and hot surfaces.

All service and/or maintenance operations must be performed by specialist and qualified personnel

w ho are aware of the necessary precautions and are capable of performing the operations correctly.

Disconnect the humidifier from the main pow er supply before accessing any internal parts.

The humidifier must be installed in accordance w ith the local standards in force.

The local safety standards in force must be applied in all cases.

The humidifier is made up of metallic and plastic parts. All parts must be disposed of according to the

local standards on waste disposal.

Certification: the quality and safety of CAREL products are assured by CAREL's ISO 9001 certified design

and production system, as well as listings from UL, cUL, CE, TUV, ETL and others.

WARNING: Your humidifier requires water to operate. Do NOT mount it above materials or machinery that

could be damaged if a leak occurs. Carel assumes no responsibility for consequential or inconsequential

damage as a result of any leaks.