User's Manual

CARESONO PadScan HD 5 Plus User’s Manual

4. Attach the probe to the main unit

Align the red dot on the main unit with the black dot on the probe, and gently insert the probe into the

main unit.

5. Plug the AC input plug of the adapter into a power outlet. when the indicator light on the DC output

turns green, it indicates it is working properly.

Battery Charging and Status

1. Insert the battery into the main unit.

2. Place the main unit securely onto the docking station.

3. Plug the power supply into the power outlet to start charging.

4. Turn on the scanner.

NOTE: The orange light on the main unit indicates that the battery requires charging, while the green light

indicates that it is fully charged.

Power Supply

PadScan HD 5 Plus is powered by two interchangeable methods: AC adapter and a built-in battery.

By AC Adapter

1. Before each use, inspect the adapter for damage; verify the EPS is in the specified range.

2. Connect the adapter to the docking station.

3. Place the main unit onto the docking station.

4. The light indicator turning green indicates that it is functioning.

5. Turn on the main unit.

By Battery

1. Insert the battery into the main unit as described on page 9.

2. Press the power button to turn on the main unit.

Warning: Use only CARESONO supplied power adapters.Ensure a tight connection between

the power cord and the connectors.

red dot