User's Manual

CARESONO PadScan HD 5 Plus User’s Manual
31
NOTE: Hold the Probe steady while the scan is
in process.
Any movement of the probe during the scan
will impair the accuracy of the measurement.
5. Re-aim and re-scan
If the scan was on target, the bladder projection
will appear in the center of the crosshairs
shown as the top right picture.
If the scan was off target, the bladder projection
will appear not in the center of the crosshairs
shown as the right bottom picture.
Please refer to Appendix C. of re-aiming.
6. View the scanned images
Once the scan is finished, the measurement
volume and six groups of sectional images of
bladder will be displayed.
Tap the LEFT or RIGHT arrows to view the six
groups of images.
or