User's Guide

76 Chapter 10 Maintenance

Scan & Go Device Care

Cleaning the Scan & Go

Use disinfection wipes for medical equipment to clean the Scan & Go device thoroughly from all sides.

Replacing the Battery (Scan & Go Generation 1)

For Scan & Go Generation 1 models released before June 2012.

Scan & Go devices after June 2012 do not have a battery.

To replace the Scan & Go battery, follow these steps:

1 Press the On/Off button for 5 seconds to turn off the Scan & Go device (A).

(The blue LED will flash quickly 3 times (B) and then the device is powered off.) Disconnect the Scan

& Go device’s USB cable (C).

Important: Replace only with a Carestream Dental genuine BL-5C

battery.

5 s