User's Guide

88 Chapter Appendix:
Scanner Manager
The scanner manager is mainly for use by technicians or under direct supervision of a dental service
technician.
Accessing the Scanner Manager
To access the Scanner Manager, perform the following steps:
1 On the desktop, double-click on the Scanner Manager icon.
OR
Click Start > Programs > IP Image Acquisition > Scanner Manager
The Scanner Manager opens
Figure 1 Scanner Manager
.
2 Select a scanner from the Scanner List.
If the message Scanner not found appears, Please check scanner connectivity, See “Quick
Troubleshooting” on page 79..
The following functions can be selected from the Scanner Manager window:
 “Scanner Info” on page 89 – Presents General system information
 “Scanner Setup” on page 90 – Enables Setting of Scanner name, user language, time &date
Note: For information on the Scanner Manager for technicians, see the CS
7600 Service Guide.
Tip: To create a desktop shortcut for the Scanner Manager, click Start >
Programs > IP Image Acquisition > Scanner Manager and drag and drop
the Scanner Manager to the desktop
Note: The connected scanner or scanners are shown in the Scanner List