User's Guide

70 Chapter 10 Maintenance

Scanner Care

Cleaning the Scanner Body

Use disinfection wipes for medical equipment to clean the scanner body thoroughly from all sides, including

the tray.

Cleaning the Detachable Insertion Panels

The CS 7600 makes use of three insertion panel sizes according to the inserted plates size (0, 0–3, and 4).

The maintenance procedure is identical for both insertion panels.

To clean and disinfect the insertion panels, follow these steps:

1 Remove the installed insertion panel by inserting a finger in the designated removal depression at the

bottom of the insertion panel (A) and lifting out the insertion panel (B).

2 Use disinfection wipes for medical equipment to clean the detachable insertion panels thoroughly from

all sides including the slot.

WARNING: It is the user’s responsibility to disinfect the imaging plates

tray daily to prevent cross contamination.

WARNING: It is the user’s responsibility to disinfect the detachable

insertion panel(s) daily to prevent cross contamination.

CAUTION: Do not autoclave; autoclaved detachable insertion panel(s)

must be discarded.