User's Manual
Table Of Contents
- 1 Overview
- Major internal assemblies
- How the laser imager works
- Print sequence
- Film sizes
- Automatic image quality and processing
- Configuring and monitoring the system (using the Web Portal)
- Enhancing serviceability with remote monitoring
- Agency compliance
- User guide conventions
- 2 Basic Operating Tasks
- Understanding the display screen
- Turning the power on and off
- Emergency shutdown or power loss
- Restarting the laser imager
- Working with film cartridges
- Checking film count
- Checking the size of the loaded film
- Film count is flashing "0"
- Inserting a new film cartridge
- Loading a different film size to match a print request
- Deleting pending jobs
- Making a test print
- Calibrating the laser imager for the installed film
- Opening or removing a cover
- Using the Web Portal to access additional functionality
- Accessing the Web Portal
- 3 Maintenance and Troubleshooting
- Overview: Status and error messages and codes
- Preventive maintenance
- Replacing the filter
- 550 code and Maintenance symbol
- Error indicators on the display screen
- Calibration error
- Required restart
- Film jams
- Using the Web Portal to gain more information on errors
- Understanding the codes on the Web Portal and the Display Screen
- Subsystem error codes and messages
- DICOM (Digital Imaging and Communications in Medicine)
- Printer
- Film Cartridge
- Job Manager
- Condition codes
- Correcting film jams
- Film jam code 116 / Jam in Area 1
- Film jam code 323 / Jam in Area 2
- Film jam code 324 or 325 / Jam in Area 2
- Film jam code 326 / Jam in Area 2 or 3
- Film jam code 543 / Jam in Area 3
- Film jam code 544 / Jam in Area 3
- Display Screen is not functional
- Calling for support
- 4 Film Technical Information
- General description
- Spectral sensitivity
- Image quality
- Environmental impact
- Storing and handling undeveloped film
- Dissipating odor
- Recycling film
- 5 Specifications
- Equipment specifications
- Operating space requirements
- Environmental requirements
- Temperature
- Relative humidity
- Altitude
- Surface levelness
- Environmental effects
- Power requirements
- Network requirements
- Publication History
Basic Operating Tasks
2011-03-31 9G3886_en 2-5
Working with film cartridges
Checking film count The film count displays on the laser imager display screen.
Checking the size of
the loaded film
The film size displays in the same location as the film count. The display
screen alternates between the film count and the size of the loaded film.
Film count is flashing
"0"
When the film cartridge is empty, the film count flashes "0" and the
power symbol is yellow, which indicates that the laser imager cannot
print. Replace the film cartridge with a new one with the appropriate size
film. See page 2-6.
Film count
125 indicates a full cartridge
Film size
"35" indicates the 1st dimension of the
film cartridge. For example, "35" then
"43" appears if 35 x 43 cm film is
loaded. Then the film count displays
again.
When the film count is "0", you
must replace the film cartridge
before you can print again