User's Manual
Table Of Contents
- 1 Overview
- Major internal assemblies
- How the laser imager works
- Print sequence
- Film sizes
- Automatic image quality and processing
- Configuring and monitoring the system (using the Web Portal)
- Enhancing serviceability with remote monitoring
- Agency compliance
- User guide conventions
- 2 Basic Operating Tasks
- Understanding the display screen
- Turning the power on and off
- Emergency shutdown or power loss
- Restarting the laser imager
- Working with film cartridges
- Checking film count
- Checking the size of the loaded film
- Film count is flashing "0"
- Inserting a new film cartridge
- Loading a different film size to match a print request
- Deleting pending jobs
- Making a test print
- Calibrating the laser imager for the installed film
- Opening or removing a cover
- Using the Web Portal to access additional functionality
- Accessing the Web Portal
- 3 Maintenance and Troubleshooting
- Overview: Status and error messages and codes
- Preventive maintenance
- Replacing the filter
- 550 code and Maintenance symbol
- Error indicators on the display screen
- Calibration error
- Required restart
- Film jams
- Using the Web Portal to gain more information on errors
- Understanding the codes on the Web Portal and the Display Screen
- Subsystem error codes and messages
- DICOM (Digital Imaging and Communications in Medicine)
- Printer
- Film Cartridge
- Job Manager
- Condition codes
- Correcting film jams
- Film jam code 116 / Jam in Area 1
- Film jam code 323 / Jam in Area 2
- Film jam code 324 or 325 / Jam in Area 2
- Film jam code 326 / Jam in Area 2 or 3
- Film jam code 543 / Jam in Area 3
- Film jam code 544 / Jam in Area 3
- Display Screen is not functional
- Calling for support
- 4 Film Technical Information
- General description
- Spectral sensitivity
- Image quality
- Environmental impact
- Storing and handling undeveloped film
- Dissipating odor
- Recycling film
- 5 Specifications
- Equipment specifications
- Operating space requirements
- Environmental requirements
- Temperature
- Relative humidity
- Altitude
- Surface levelness
- Environmental effects
- Power requirements
- Network requirements
- Publication History
3-8 9G3886_en 2011-03-31
Maintenance and Troubleshooting
Job Manager
Cartridge closure
is pending
Power symbol is green
Calibrate symbol is off
Pause symbol is on
Pause Requested You pressed the Pause button, but
the rollback has not started because
films are still moving through the
laser imager. When the closure is
complete, the Pause symbol is off. At
this time, you can remove the film
cartridge.
Film
Cartridge
State
Display Screen Web Portal Description
Job
Manager
Status
Display Screen Web Portal Description
Active Not Applicable Shows how many
print requests have
been initiated.
The laser imager is accepting DICOM job
requests and film is available for all current jobs.
No Media Power symbol is green
Film Size symbol is
yellow
The required film size
is shown on the display
screen
Shows how many jobs
with this status are in
the job queue.
The laser imager is accepting DICOM job
requests but film of the correct size and type is
not available for at least one current job. See
“Loading a different film size to match a print
request” on page 2-7.
Offline Status code: 704
Power symbol is green
DICOM Offline The laser imager cannot accept any DICOM job
requests. Restart the laser imager.