User's Manual
Table Of Contents
- 1 Overview
- Major internal assemblies
- How the laser imager works
- Print sequence
- Film sizes
- Automatic image quality and processing
- Configuring and monitoring the system (using the Web Portal)
- Enhancing serviceability with remote monitoring
- Agency compliance
- User guide conventions
- 2 Basic Operating Tasks
- Understanding the display screen
- Turning the power on and off
- Emergency shutdown or power loss
- Restarting the laser imager
- Working with film cartridges
- Checking film count
- Checking the size of the loaded film
- Film count is flashing "0"
- Inserting a new film cartridge
- Loading a different film size to match a print request
- Deleting pending jobs
- Making a test print
- Calibrating the laser imager for the installed film
- Opening or removing a cover
- Using the Web Portal to access additional functionality
- Accessing the Web Portal
- 3 Maintenance and Troubleshooting
- Overview: Status and error messages and codes
- Preventive maintenance
- Replacing the filter
- 550 code and Maintenance symbol
- Error indicators on the display screen
- Calibration error
- Required restart
- Film jams
- Using the Web Portal to gain more information on errors
- Understanding the codes on the Web Portal and the Display Screen
- Subsystem error codes and messages
- DICOM (Digital Imaging and Communications in Medicine)
- Printer
- Film Cartridge
- Job Manager
- Condition codes
- Correcting film jams
- Film jam code 116 / Jam in Area 1
- Film jam code 323 / Jam in Area 2
- Film jam code 324 or 325 / Jam in Area 2
- Film jam code 326 / Jam in Area 2 or 3
- Film jam code 543 / Jam in Area 3
- Film jam code 544 / Jam in Area 3
- Display Screen is not functional
- Calling for support
- 4 Film Technical Information
- General description
- Spectral sensitivity
- Image quality
- Environmental impact
- Storing and handling undeveloped film
- Dissipating odor
- Recycling film
- 5 Specifications
- Equipment specifications
- Operating space requirements
- Environmental requirements
- Temperature
- Relative humidity
- Altitude
- Surface levelness
- Environmental effects
- Power requirements
- Network requirements
- Publication History
4-2 9G3886_en 2011-03-31
Film Technical Information
Environmental impact Tests show that the Laser Imaging Film is not considered hazardous to
the environment. As a result, you can develop, recycle, and dispose of
film with less impact on the environment than if you were using
wet-developed silver halide films.
Storing and handling
undeveloped film
To achieve consistent results up to the expiration date indicated on the
film package, the Laser Imaging Film must be stored in a cool, dry
place (5° to 25° C, or 41° to 77° F) and protected from radiation and
chemistry fumes.
The film can withstand short-term temperature spikes
(up to 35° C, or 95° F) for several hours during transit without any
significant effect on film quality or performance. Transit temperatures
above 35° C (95° F) will gradually diminish shelf life.
Handling developed film Handling the Laser Imaging Film requires reasonable care. Spills,
humidity, and other moisture typically have no significant effect on
developed films. However, prolonged exposure to intense light or
excessive heat (54.4° C or 130° F) for more than three hours may cause
some gradual darkening of images. Leaving films in vehicles in hot
climates for extended periods of time is not recommended.
For best results, store film in sleeves when not being reviewed. The
Laser Imaging Film can be left on a light box for more than 24 hours. In
extreme cases in which light boxes are exceptionally hot
(49° C, or 120° F), the manufacturer recommends removing them prior
to eight hours of continuous exposure.
Laser Imaging Film
US Environmental Regulations Comparison
Wet (Silver Halide) Film Dry Film
Developer Fixer Wash Film Film
Product Regulations
OSHA MSDS Required Required Not required Not required Provided
DOT Hazardous Hazardous No limits No limits No limits
Use permits Local Local None None None
Disposal* Regulations
EPA Hazardous Hazardous No No No
DOT Hazardous Hazardous No No No
There is no SUPERFUND liability with dry Laser Imaging Film.
* State and local laws vary. Consult appropriate regulations or authorities prior to disposal.