User's Manual

Table Of Contents

Overview

2011-03-31 9G3886_en 1-1

Overview

The Laser Imaging System is a continuous-tone laser imager with an

internal photothermographic film processor. Heat, rather than photo

chemicals, is used to develop the film. This easy-to-use and reliable laser

imager provides high quality prints. Use the prints from this system for:

• Diagnostic purposes to determine patient treatments

• Referral, sharing, or educational purposes

The system receives and prints from image sources such as medical

electrical equipment (modalities) and workstations over the network.

You can send print jobs simultaneously from multiple image sources.

The open design lets you connect to modalities of all types and vendors.

IMPORTANT: Install the printing system in a secure location to protect

patient privacy rights if required by local regulations.

1Top cover. Covers the processor rollers. The top cover is interlocked.

2 Display screen. Your interface to the laser imager. Provides status and

error information.

3Right cover. Protects sensitive electronic equipment. The right cover

is interlocked and is only accessed by service personnel.

4 Film supply. Install film cartridges here. Supports four film sizes.

5 Left cover. You might remove the left cover to clear an occasional

film jam. The left cover is interlocked.

6 Power switch. The power switch is on the back.

7 Exit tray. Extend the exit tray to hold large film (35 x 43 cm, or

14 x 17 in.) as it finishes printing. It can hold up to 50 processed sheets

of film.