User's Guide
Table Of Contents
- 1 Overview
- 2 Using and Maintaining the Imager
- 3 Troubleshooting
- 4 Film Technical Information
- 5 Specifications
- Glossary
- Appendix A: Warranty and Limitation of Liability
- Important Notice to Purchaser
- End User License Agreement (EULA)
- Carestream Health, Inc. Software End User License Agreement
- End-User License Agreement for Microsoft Desktop Operating Systems
- Software Product License
- Warranty/Special Provisions for Austria, New Zealand or Papua New Guinea - Express Limited Warranty
- Warranty/Special Provisions for England Scotland, Wales and Ireland - Limited Warranty
- Warranty/Special Provisions for Canada - Limited Warranty
- GARANTIE ET DISPOSITIONS PARTICULIÈRES POUR LE CANADA GARANTIE LIMITÉE
- Warranty/Special Provisions for the United States of America and any Other Country - Limited Warranty
3-2 2G0733 January 14, 2008
Troubleshooting
Printer Status Messages
The following table describes how the local panel and Web Portal indicate
printer status to the user.
Table 3-2: Printer Status Messages
Printer
Status
Local Panel
Web Portal
Display
DICOM Status Description
Any Film
Supply Open
• Ready LED off
• Supply display is
blanked for open
supply
• Status code: 20702
Not Ready WARNING /
COVER OPEN
At least one of the film
supplies is open (not
inserted and latched into
place).
Door Open • Ready LED off
• Attention LED on
• Status code: 20701
Hood Open WARNING /
COVER OPEN
The Imager hood is open or
one of the side panels may
be off. The Imager is not
"Ready".
Failed • Ready LED off
• Error LED on
• Error code shown
Failed See Condition
Code
An error has occurred that
prevents printing.
Imager
Unlock
Requested
• Ready LED off
• Unlock LED
flashing for the
requested film
supply
Not Ready n/a The printer will complete
any prints in progress prior
to unlocking a film tray for
removal.
Offline • Ready LED off
• Attention LED on
• Status code: 20704
Printing
Disabled
WARNING /
PRINTER
OFFLINE
The printer has been
disabled through the Web
Portal, or the user has
pressed the Offline button
on the local panel.
Printing • Ready LED
flashing
Printing NORMAL The Imager is currently
printing films.
Ready • Ready LED on
• Supply display
shows count, type,
and size for each
film supply
Ready NORMAL The Imager is online and
the Processor has reached
operating temperature.
Self-test • Ready LED off
• the display shows
the Carestream logo
Self-test WARNING /
PRINTER INIT
This occurs when power is
first applied to the Imager.