User's Guide

3-6 2G0733 January 14, 2008
Troubleshooting
Condition Codes
Condition codes are shown on the display screen in the order in which they
are generated. If there is more than one code associated with the current
condition of the Imager, the first code is shown on the display screen for 6
seconds, while other codes in the list are displayed for 3 seconds as the list
is cycled. The LEDs on the left side of the local panel will be on whenever
there is a condition code of that type.
Table 3-5: Condition Codes
Code Web Portal Message User Action
01004 MIM Core: Internal Software
Error
1. Shut down the Imager, then start the Imager.
2. If the error persists, call for service.
04200 MIM Core: Disk Full 1. Delete jobs in the "Unprintable jobs" queue.
2. Load requested film type for jobs in the "Waiting
for media" queue.
3. If the error persists, call for service.
06400 MIM Core: Image Page Error 1. Delete jobs in the "Unprintable jobs" queue.
2. Resend the print job from the image source.
3. If the error persists, call for service.
06410 MIM Core: Image Rendering
Error
1. Delete jobs in the "Unprintable jobs" queue.
2. Resend the print job from the image source.
3. If the error persists, call for service.
06411 MIM Core: Image Data Error 1. Delete jobs in the "Unprintable jobs" queue.
2. Resend the print job from the image source.
3. If the error persists, call for service.
06420 MIM Core: Internal Software
Error
1. Delete jobs in the "Unprintable jobs" queue.
2. Resend the print job from the image source.
3. If the error persists, call for service.
06430 MIM Core: Internal Software
Error
1. Delete jobs in the "Unprintable jobs" queue.
2. Resend the print job from the image source.
3. If the error persists, call for service.
10001 MIS: Internal Software Error 1. Shut down the Imager, then start the Imager.
2. If the error persists, call for service.