User's Guide
Table Of Contents
- 1 Overview
- 2 Using and Maintaining the Imager
- 3 Troubleshooting
- 4 Film Technical Information
- 5 Specifications
- Glossary
- Appendix A: Warranty and Limitation of Liability
- Important Notice to Purchaser
- End User License Agreement (EULA)
- Carestream Health, Inc. Software End User License Agreement
- End-User License Agreement for Microsoft Desktop Operating Systems
- Software Product License
- Warranty/Special Provisions for Austria, New Zealand or Papua New Guinea - Express Limited Warranty
- Warranty/Special Provisions for England Scotland, Wales and Ireland - Limited Warranty
- Warranty/Special Provisions for Canada - Limited Warranty
- GARANTIE ET DISPOSITIONS PARTICULIÈRES POUR LE CANADA GARANTIE LIMITÉE
- Warranty/Special Provisions for the United States of America and any Other Country - Limited Warranty
3-12 2G0733 January 14, 2008
Troubleshooting
29924 Densitometer: Internal
Diagnostic Failure
1. Shut down the Imager, then start the Imager.
2. If the error persists, call for service.
29925 Densitometer: Internal
Diagnostic Failure
1. Shut down the Imager, then start the Imager.
2. If the error persists, call for service.
29926 Densitometer: Internal
Diagnostic Failure
1. Shut down the Imager, then start the Imager.
2. If the error persists, call for service.
29927 Densitometer: Internal
Diagnostic Failure
1. Shut down the Imager, then start the Imager.
2. If the error persists, call for service.
29931 Densitometer: Internal
Communications Failure
1. Shut down the Imager, then start the Imager.
2. If the error persists, call for service.
36931 Local Panel: Internal
Communications Failure
1. Shut down the Imager, then start the Imager.
2. If the error persists, call for service.
36935 Local Panel: No
Communications from MCS
1. Shut down the Imager, then start the Imager.
2. If the error persists, call for service.
Table 3-5: Condition Codes (Cont’d)
Code Web Portal Message User Action