User's Guide

Specifications
January 14, 2008 2G0733 5-3
Environmental Requirements
Temperature • Operating: 15° to 33° C (59° to 91° F)
• Storage: -40° to 60° C (-40° to 140° F)
Relative Humidity • Operating: 20% to 80% RH, noncondensing
• Storage: 10% to 90% RH, noncondensing
Altitude • 30 m (100 ft.) below sea level to 3,048 m (10,000 ft.) above sea level
Surface Condition The surface must be a level (must be level within 1°) table top or counter
capable of supporting the weight of the Imager. For the Imager to operate
with no image degradation, surface vibration levels cannot exceed the
following:
Environmental Effects
• Heat Dissipation: total heat dissipation for the Imager is 850
BTU/hour
• Acoustical Noise:
– Less than or equal to 75 dB-A at 1 m during a sound burst of 1
sec. or less
– Less than or equal to 65 dB-A at 1 m during normal operation
– Less than or equal to 50 dB-A at 1 m during idle mode
Laser Specifications
• Wavelength - 810 nm
• Power - 50 mW
• Radiation class - 3B
• Type - Diode
G
2
/Hz
Freq. Range Direction
1 x 10
-7
1-50 Hz Vertical or horizontal
6 x 10
-5
50-200 Hz Vertical or horizontal
5 x 10
-6
200-650 Hz Vertical or horizontal
1 x 10
-6
650-1000 Hz Vertical or horizontal