User's Guide
Table Of Contents
- 1 Overview
- 2 Using and Maintaining the Imager
- 3 Troubleshooting
- 4 Film Technical Information
- 5 Specifications
- Glossary
- Appendix A: Warranty and Limitation of Liability
- Important Notice to Purchaser
- End User License Agreement (EULA)
- Carestream Health, Inc. Software End User License Agreement
- End-User License Agreement for Microsoft Desktop Operating Systems
- Software Product License
- Warranty/Special Provisions for Austria, New Zealand or Papua New Guinea - Express Limited Warranty
- Warranty/Special Provisions for England Scotland, Wales and Ireland - Limited Warranty
- Warranty/Special Provisions for Canada - Limited Warranty
- GARANTIE ET DISPOSITIONS PARTICULIÈRES POUR LE CANADA GARANTIE LIMITÉE
- Warranty/Special Provisions for the United States of America and any Other Country - Limited Warranty
January 14, 2008 2G0733 G-1
Glossary
CR Computed Radiography, the process of creating digital radiographic
images.
CT Computed Tomography, the process of creating digital tomographic
images.
Cycle power Cycle power means to shut down and power up the Laser Imager.
DICOM Digital Imaging and Communications in Medicine. A TCP/IP-based
protocol for transmitting and receiving medical imaging and related data
over a network.
Dmax Dmax means maximum density. Dmax is the density of an area on the
film that has received maximum exposure.
Dmin Dmin means minimum density. Dmin is the density of an unexposed
area on the film.
DR Digital radiography, the process of creating digital radiographic images.
GSDF Grayscale Standard Display Function.
GSM Gray Scale Manager.
Film model The film model defines the print characteristics for a particular lot of
film.
Key operator The person(s) designated by the department manager to receive
applications training and allowed access to password-protected areas to
make system changes.
LED Light Emitting Diode.
Modality Medical equipment that actually generates medical images (for
example, an MRI).
Monotonic Continuously increasing. When a calibration sheet, which consists of
strips of increasing density (Dmin) to maximum density (Dmax), is read
by the densitometer, the density values must be monotonic
(continuously increasing). If they are not, an error message is generated.
MPDB Modality Preferences Database.
MR Magnetic Resonance.
N/A Not available or not applicable.
PLUT Presentation Look-Up Table.
Service image An image used by service personnel for troubleshooting.
Shutdown The process of exiting current tasks and applications and turning the
power off.
SMPTE test pattern A Society of Motion Picture and Television Engineering monitor test
pattern that is used for analyzing image-quality problems.
Test type The type of test film that will be printed. Two film test types are
available: a density test film (SMPTE pattern) and a calibration film.