User's Manual

Basic Operating Tasks
AA2204_en | 2012-07-27 2–9
Replace an Empty Film Cartridge
When a film cartridge is empty, the film count appears as 0 on the display screen.
Note
Before you load a new film cartridge, make sure that the Pause symbol is off. During normal
operation, the symbol is off. When the film cartridge cover is open, the symbol is on. To avoid
exposing the film to light, do not open the film supply until the Pause symbol is off.
1. If the Pause symbol is on, press the symbol to close the film cartridge cover.
2. Open the film supply.
3. Hold the edges of the film cartridge and lift the empty cartridge out of the film
supply.
4. Discard the empty cartridge.
5. Insert the new film cartridge. Align the cartridge with the label facing up and the
perforations to the front. Set the leading edge on the cartridge guides, and then slide
the film cartridge into the imager to engage the detents in the bottom of the
cartridge.
6. Close the film supply.
7. Check that the display screen changes to reflect the new film count. A new film
cartridge contains 125 sheets.
H241_0006BC
H241_0006BCA
cartridge guide
perforations
detents
film supply
leading edge
SHORT TERM CONFIDENTIAL