User's Manual

Basic Operating Tasks
2–10 AA2204_en | 2012-07-27
Load a Different Film Size to Match a Print Request
If a print request requires a different film size, the requested film size flashes on the
display screen. Change the installed film to match the print request.
• M = mammography film
• B = blue base film
• C = clear base film
Figure 8: The requested film size flashes, and the Film Size symbol indicates the need to load a
different film size and/or type. In this example, mammography 10 x 12 in. film is requested. The
amber text changes between “M10” and “M12.” Load it to continue with the print request.
1. If the Pause symbol is on, press it and wait until it turns off.
2. Open the film supply.
3. Hold the edges of the film cartridge and lift the cartridge out of the film supply.
4. Insert the new film cartridge:
a. Align the cartridge with the label facing up and the perforations to the front.
b. Set the leading edge on the cartridge guides.
c. Slide the film cartridge into the imager to engage the detents in the bottom of
the cartridge.
H241_0006BC
H241_0006BCA
cartridge guide
perforations
detents
film supply
leading edge
SHORT TERM CONFIDENTIAL