User's Manual
Manuals
Brands
Carestream Health Manuals
Electronics
Film Printer for Medical Images using 13.56 MHz Transmitter RFID
31
32
33
34
35
36
37
38
39
40
Table Of Contents
1 Overview
How the Imager Works
Print Sequence
Film Sizes
Mammography Imaging
Automatic Image Quality and Processing
Configure and Monitor the System (Using the Web Portal)
Enhanced Serviceability with Remote Monitoring
Agency Compliance
User Manual Conventions
2 Basic Operating Tasks
The Display Screen
Imager Power
Power Switch Location
Start the Imager
Restart the Imager
View the Film Cartridge Information
Replace an Empty Film Cartridge
Load a Different Film Size to Match a Print Request
Delete All Pending Jobs
Calibrate the Imager for the Loaded Film
Automatic vs. Manual Calibration
Manual Calibration
Make a Test Print
SMPTE Image Prints
Mammography Test Prints
Open or Remove a Cover
Access More Functionality with the Web Portal
Access the Web Portal
3 Maintenance and Troubleshooting
Overview: Status and Error Messages and Codes
Preventive Maintenance
About the Charcoal Filter
Replace the Filter
550 Code and Maintenance Symbol
Error Indicators on the Display Screen
Recognize and Handle a Calibration Error
Related topics
Handle a Required Restart
Recognize and Handle a Film Jam
Related topics
Using the Web Portal to Gain More Information on Errors
Subsystem Error Codes and Messages
DICOM (Digital Imaging and Communications in Medicine)
DICOM (Digital Imaging and Communications in Medicine)
Printer
Film Cartridge
Job Manager
Condition Codes
Film Jam Indication and Areas
Clear Film Jam Code 116 / Jam in Area 1
Clear Film Jam Code 323 / Jam in Area 2
Clear Film Jam Code 324 or 325 / Jam in Area 2
Clear Film Jam Code 326 / Jam in Area 2 or 3
Clear Film Jam Code 543 / Jam in Area 3
Clear Film Jam code 544 / Jam in Area 3
Display Screen is Not Functional
Call for Support
4 Film Technical Information
Spectral Sensitivity of the Film
Film Image Quality
Environmental Impact
Undeveloped Film Handling and Storage
Developed Film Handling and Archival
Exposing Film to Moisture
Odor Dissipation
Heat Dissipation
Film Recycling
5 Specifications
Equipment Specifications
Operating Space Requirements
Environmental Requirements
Environmental Effects
Power Requirements
Network Requirements
6 Publication History
Maintenanc
e and Troubleshoo
ting
3–4
AA2204_
en
|
2012
-07-27
Replace the Filter
When the fil
ter must be
replaced,
the display scr
een shows the
error code
and the
Maintenance s
ymbol:
1.
Remove the filter cove
r.
2.
Remove the filter by li
fting it up and pulling
it forward.
H241_0007AC
SHORT TERM CONFIDENTIAL
1
...
...
30
31
32
33
34
...
...
64