User's Manual

Table Of Contents

Maintenance and Troubleshooting

3–6 AA2204_en | 2012-07-27

Error Indicators on the Display Screen

The imager can detect errors and other conditions that require a response. Some errors

or abnormal conditions are reported on the display screen in the form of condition codes

and symbols.

Note

These errors are also reported at the Web Portal.

Recognize and Handle a Calibration Error

When the calibration has failed, the display screen shows a 624, 631, or 632 error and the

Calibrate symbol is amber.

Figure 1: In this example, the amber indicator light and Calibration symbol indicate that

calibration of the film in the lower cartridge has failed.

The most common cause is a film-related problem. Depending on the cause, you may be

able to keep printing, but the imager may not be optimally calibrated for this film lot.

Attempt a manual calibration. If the calibration fails again, load a new film cartridge.