User's Manual

Maintenance and Troubleshooting
3–26 AA2204_en | 2012-07-27
Clear Film Jam Code 543 / Jam in Area 3
Note
This error displays as code 26543 at the Web Portal.
1. If the Pause symbol is on, press it and wait until it goes off.
2. Remove the left cover:
a. Open the film supply.
b. Remove the top cover.
c. Turn the knurled knobs by hand.
3. Rotate the exit roller handle clockwise until a film exits the imager.
4. Reinstall the covers.
Related topics
Film Jam Indication and Areas
Clear Film Jam code 544 / Jam in Area 3
Note
This error displays as code 26544 at the Web Portal.
1. Remove any film that is jammed in the exit tray.
2. If the Pause symbol is on, press it and wait until it goes off.
3. Remove the top cover and remove any films.
4. Close the top cover.
Related topics
Film Jam Indication and Areas
SHORT TERM CONFIDENTIAL