User Manual
Table Of Contents
- 1 Safety and Regulatory Information
- Document Conventions
- Intended Use and Indications for Use
- Safety and Related Information
- DRX-1 System Product Information
- Disposal Information
- Operating Environment
- 2 Hardware and Operation
- Overview
- CARESTREAM DRX-1 System
- Cautions
- Installing the Hardware
- CARESTREAM DRX-1 System Battery
- Labeling the Detector
- DRX-1 Detector LED
- Positioning the Detector in the Bucky
- Range of Operation
- Wireless Operation
- Tether Operation
- Cleaning the Hardware
- With Each Occurrence of Patient Contact
- System Maintenance
Hardware and Operation
7H8166 2-7
Labeling the Detector
The labels that come with the detector help you:
1. Uniquely identify the detector.
2. Orient the detector correctly in use.
Go to Key Operator Functions > Equipment Management to view the
selections of DRX-1 labels to choose from. Labels are grouped by colors and
number series so that you can keep the same scheme in each room. Make
sure the label you choose is not already in the system.
Applying the label:
1. Place the detector on a flat surface with the Tube Side facing you.
2. Place the label inside the Tube Side label as indicated near the tube side
corner label on the detector.
CAUTION:
The detector is fragile and contains glass. Handle with care!
Dropping the detector could result in damage or need for
recalibration.
DRX-1 Detector LED
The detector has one LED that provides a status during operations. The single
LED will alternate with blue and green flashes in various patterns. Green
flashes relate to power. Blue flashes relate to connectivity. No flash pattern is
displayed when the detector is acquiring an image.